Table of Contents
Advertisement
PARTS REQUIRED:
3/8 x 48 x 96"
x1
(1 x 121,9 x 243,8 cm)
Handle panels with care to avoid breakage.
Handle panels with care to avoid breakage.
Place 48 x 96" left panel primed side up onto wall frame centered in door opening as shown.
1
• Ensure top of panel is overhanging the top of frame by 6".
• Hold the 3/4" measurement along left edge of panel. Use a gauge block.
Nail panel with two 2" nails 6" (15,2 cm) apart. Maintain 64" (162,5 cm) measurement
2
between studs and square frame.
6"
(15,2 cm)
3/4" GAUGE
BLOCK
For squareness maintain
3/4" measurement along
panel edge.
3/4"
(1,9 cm)
6"
(15,2 cm)
FRONT WALL PANELS
3/4" GAUGE
BLOCK
BEGIN HERE
Maintain
Square
CENTER
MAINTAIN 64" DIMENSION
BETWEEN STUDS
Primed
side up
19
x40
UNTIL FRONT PANELS ARE
INSTALLED, HANDLE CAREFULLY
TO AVOID BREAKING AT
CORNERS AND EDGES.
CENTER
2" (5,1 cm)
Advertisement
Table of Contents
