Table of Contents
Advertisement
PARTS REQUIRED:
x1
• Ensure your wall frame is square by installing one panel and squaring frame.
• Ensure top of panel is overhanging the top of frame by 4".
Place 48 x 72" panel onto wall frame with primed side up as shown.
3
Use the gauge block to mark the 3/4" measurement on the wall stud. Secure panel with
two 2" nails in the corners (Fig. A).
4
Move to the opposite end. Using the long edge of the panel as a lever move the panel side-to-side until you have
a 3/4" measurement on the wall stud. Secure corner with two 2" nails (Fig. B).
Nail the panel using 2" nails 6" apart on edges and 12" apart inside panel.
5
4"
(10,2 cm)
48"
(121,9 cm)
BACK WALL PANELS
48 x 72"
(121,9 x 213,4 cm)
3/4"
(1,9 cm)
Fig. A
2 Nails
3/4"
(1,9 cm)
(15,2 cm)
12"
(30,5 cm)
3/4"
(1,9 cm)
3/4" GAUGE
BLOCK
2 Nails
BEGIN HERE
For squareness maintain 3/4"
measurement along panel edges.
6"
3/4" GAUGE
BLOCK
Primed
side up
15
x45
2" (5,1 cm)
3/4"
(1,9 cm)
Fig. B
Advertisement
Table of Contents
