Table of Contents
Advertisement
PARTS REQUIRED:
x1
7/16 x 11-7/8
60-1/4"
x
30,2
152,7
(1,1 x
x
cm)
Roof panels may cause serious injury until securely fastened.
BEGIN
Place the 11-7/8 x 96" lower roof panel with the rough side up (painted-grid lines side) with 2-7/8"
1
overhang from back wall panel (Fig A). Ensure the panel measures 3/4" (1,9 cm) along the length
of the rafter (Fig. B).
Secure panel with 2" nails as shown.
NOTE:
Measurement from back wall panel.
2-7/8"
(8,3 cm)
Fig. A
Place the 11-7/8 x 60-1/4" lower roof panel with the rough side up flush to installed 11-7/8 x 96" panel.
2
Ensure the 11-7/8 x 60-1/4" roof panel measures 2-7/8" (8,3 cm) overhanging back wall panel (Fig B) and is
also flush with installed panel (Fig C).
Secure panel with 2" nails as shown.
Flush
NOTE:
Measurement from back wall panel.
ROOF PANELS
x1
7/16 x 11-7/8 x 96"
(1,1 x 30,2 x 244 cm)
2-7/8"
(8,3 cm)
11-7/8 x 96"
(30,2 x 244 cm)
Fig. C
Flush
Fig. B
2-7/8"
(8,3 cm)
9"
(22,9 cm)
2-7/8"
2-7/8"
(8,3 cm)
(8,3 cm)
35
x4
2" (5,1 cm)
Gauge
Block
Fig. B
3/4"
(1,9 cm)
Measure up 9" and
snap a chalk line.
11-7/8 x 60-1/4"
(30,2 x 152,7 cm)
Advertisement
Table of Contents
