Intuitive Mercury 6-5M Controller with TDB
Intuitive Mercury Network Expansion Options
The Intuitive Mercury is supplied with an RS232
Network Card fitted as standard. Some example
optional network cards are shown below
WiFi Network Card (PR0769-EXT)
Intuitive Mercury TDB with Daughter Board Option
The Intuitive Mercury TDB controller can be purchased with optional daughter boards to expand on the controller I/O. The controller can be fitted
with a single daughter board, the types of daughter boards which are currently available and their part numbers are shown below.
Please note the daughter boards are a factory fit option only and must be ordered with the controller.
Daughter Board Options
3 x Temperature Probe Input Expansion board
1 x 0-5V/0-10Vdc Input & 1 x 0-5V/0-10Vdc Output board
2 x 0-5V/0-10Vdc Input board
2 x 0-5V/0-10Vdc Output board
2 x 4-20mA Output Board
1 x 4-20mA Input & 1 x Probe Input Expansion board
1 x 0-5/0-10Vdc Input & 1 x Probe Input Expansion board
1 x 4-20mA Input & 1 x 4-20mA Output board
3 x Input High Speed Pulse Counter board
*Each daughter board comes with a colour coded connector as a visual indication.
Warning
Ensure that all power is
switched off before
installing or maintaining
this product
RS232 Network Card (Default)
Network Activity &
Status LED
IP Network Card (PR0770)
Rotary Address
Switches
WiFi Network Card (PR0769-INT)
Connector Colour *
Green
Blue
Orange
Orange
Black
Black
Blue
Black
Green
Revision 2.6
Network Activity
LED
Network
Collision LED
Daughter card location (Optional)
Page 7 of 53
www.resourcedm.com