Intuitive Mercury Tdb Display (Pr0750-Tdb); Intuitive Mercury Physical Io - Resource Data Management PR0750-TDB Installation & User Manual

Intuitive Mercury 6-5M Controller with TDB

Intuitive Mercury TDB Display (PR0750-TDB)

Front Display Features
LED's: -
Valve Icon
Fans Icon
Lights Icon
Defrost Icon
On-Line
Service
Alarm
HACCP

Intuitive Mercury Physical IO

Mains Supply
100 240vAC
-
50-60Hz
Warning
Ensure that all power is
switched off before
installing or maintaining
this product
Keys
Main Display
4 character LED display
When viewing numerical values on the display it will
allow from -99.9 to 999.9 Or -999 to 9999 depending on
units selected. All values out with these bounds will
show N/A on the display.
Network
Expansion
Port
Revision 2.6
Intuitive
MERCURY CONTROLLER
If a solid state relay is fitted in any position then
the common feed is connected to the common
terminal and the switched output is connected to
the N/C terminal, the N/O terminal is not used.
The solid state relay will only switch AC voltage, it
will not switch DC voltage.
All inputs and outputs are plug and socket. The
supply voltage and relay outputs have individual
fuse protection.
Page 6 of 53
www.resourcedm.com

