Comfort Block; Offline Block; Diagnostic Blocks; Analogue Display - Resource Data Management PR0750-TDB Installation & User Manual

Intuitive Mercury 6-5M Controller with TDB

Comfort Block

Input A: Temperature
Input B: Humidity
Output: Comfort temperature

Offline Block

Input A: Time

Diagnostic blocks

Analogue Display

Icon

Digital Display

Icon
Warning
Ensure that all power is
switched off before
installing or maintaining
this product
Icon
Humidity will affect the temperature
output by the comfort index.
See:
Icon
Properties
Appendix 1
Properties
This block gives a visual display of an analogue value within a TDB
program using online or simulation mode and has the option of assigning
units. If the Internal option is ticked then this value will remain within TDB
program. If un-ticked then the Analog display will appear as a value in the
output section of the TDB controller "Control Summary" or as a value in the
output section of the TDB controller values page on a Data Manager. If the
Input option is ticked the Analog display will appear as a value in the input
section of a Mercury 2 TDB controller or Data Manager.
This block gives a visual display of a digital value within a TDB program
using online or simulation mode. If the Internal option is ticked then this
value will remain within TDB program. If un-ticked then the Digital display
will appear as a value in the output section of the TDB controller "Control
Summary" or as a value in the output section of the TDB controller values
page on a Data Manager. If the Input option is ticked the Analog display
will appear as a value in the input section of a Mercury Intuitive controller
or Data Manager.
Revision 2.6
Block Name can be changed.
When communications are lost
between the Intuitive Mercury TDB
controller and the front-end the Output
will go on after the input "Time" has
elapsed.
Page 41 of 53
www.resourcedm.com