Average & Limit Blocks; Range & Min, Max, Avg Block - Resource Data Management PR0750-TDB Installation & User Manual

Intuitive Mercury 6-5M Controller with TDB
Average & Limit blocks
Icon
A
B
Output = (A + B) ÷ 2
Range & Min, Max, Avg Block
A
B
C
Input A: Analogue Value
Input B: Max Limit
Input C: Min Limit
Digital output goes off when the Analogue
value is out with the Max and Min limits.
Warning
Ensure that all power is
switched off before
installing or maintaining
this product
Icon
A
B
C
Output = (A + B + C) ÷ 3
Range Icon
Icon
A
B
C
D
Output = (A + B + C + D) ÷ 4
Min, Max, Avg Icon
Input 1
Valid 1
Input 2
Valid 2
Input 3
Valid 3
Input 4
Valid 4
Input 5
Valid 5
Input 6
Valid 6
Input 7
Valid 7
Input 8
Valid 8
Input 1-8: Analogue Values
Valid 1-8: If the valid input is present the corresponding
analogue input value will be used by the block.
Min: The minimum value is outputted.
Max: The maximum value is outputted
Avg: The average value is outputted.
Revision 2.6
Icon
A
B
C
If A > B Output = B
If A < C Output = C
If C < A < B Output = A
Min
Max
Avg
Page 29 of 53
www.resourcedm.com