Digital Output; Network Analogue In; Network Digital In; Pulse Input - Resource Data Management PR0750-TDB Installation & User Manual

Intuitive Mercury 6-5M Controller with TDB

Digital Output

Icon Properties
Output: Select which output is to be used
from the drop-down menu
Tick the invert output box to invert the relay
operation

Network Analogue In

Icon Properties
Network Analogue inputs can be used to map analogue values from a Data Builder program running on a Data
Manager to an Intuitive Mercury TDB controller
Please see the following section that outlines the setup process. –

Network Digital In

Icon Properties
Network digital inputs can be used to map digital values from a GP Timer or a Data Builder program, running on a
Data Manager, to an Intuitive Mercury TDB controller
Please see the following section that outlines the setup process. –

Pulse Input

Icon Properties
Pulse input blocks are used to pick-up pulse counts from
any one of the 3 Pulse Reader Daughter Card inputs.
Select 1 of the 3 channels and give the block a meaningful name.
The red analogue output is the channel count value.
The digital Input, when activated resets the channel count to 0.
Warning
Ensure that all power is
switched off before
installing or maintaining
this product
Network Analogue Inputs
Network Digital Inputs
Revision 2.6 Page 23 of 53
www.resourcedm.com