IDLE_SOFT_KEY_B
Value Format
Description
Value Range
Default Value
Web User Interface Reference
IDLE_SOFT_KEY_C
Value Format
Description
Value Range
Default Value
Web User Interface Reference
Document Version 2017-07
INTEGER
Specifies the soft key (B) during IDLE state.
•
1: Phonebook
•
2: Menu
•
3: Outgoing Call Log
•
4: Incoming Call Log
•
5: Redial
•
6: Page
•
7: Intercom
Note
•
The following features are applied to the soft key only when the
corresponding parameters are enabled. Otherwise, the soft key
will remain in its original setting.
–
Page: MPAGE_FUNCKEY_ENABLE
–
Intercom: INTERCOM_ENABLE
2
Soft Key B (Center) (Page 124)
INTEGER
Specifies the soft key (C) during IDLE state.
•
1: Phonebook
•
2: Menu
•
3: Outgoing Call Log
•
4: Incoming Call Log
•
5: Redial
•
6: Page
•
7: Intercom
Note
•
The following features are applied to the soft key only when the
corresponding parameters are enabled. Otherwise, the soft key
will remain in its original setting.
–
Page: MPAGE_FUNCKEY_ENABLE
–
Intercom: INTERCOM_ENABLE
3
Soft Key C (Right) (Page 125)
5.3.32 Call Control Settings
Administrator Guide
341