Panasonic KX-TGP600 Quick Start Manual

PANASONIC IP CORDLESS SYSTEM
(KX-TGP600 AND KX-TPA60)
Status Indicator
Basic Functions
A quick guide to the basics of your Panasonic IP DECT.
Place a call • Use the keypad to enter the other party's phone
End a call Whilst on an active call:
• Press
Hold a call Whilst on an active call:
• Press
Place a call on
Whilst on an active call:
Handsfree mode • Press
Adjust call/ Whilst on an active call/on Standby mode:
ringer volume
• Use navigation keys
Mute/unmute Whilst on an active call/Standby mode:
a call • Use soft key to select
Note: MUTE mode is active if the icon is flashing.
View and call
Whilst on Standby mode:
from outgoing • Use soft key to select
log • Use navigation keys to scroll to desired contact and
View and call Whilst on Standby mode:
from incoming • Use soft key to select
log • Use same soft key to select
• Use navigation keys to scroll to desired contact and
View and call Whilst on Standby mode:
from missed
• Use navigation keys to scroll to the left and select
calls
• Use navigation keys to scroll to desired contact and
Undo typing
• Press
Handset
Locator
button
number, and press Talk/Speaker Phone.
Power/Cancel to end the call.
Hold/Msg.
Talk/Speaker Phone.
call volume.
MUTE to enable/disable
the handset microphone.
Outgoing Log.
press Talk/Speaker Phone to place the call.
Outgoing Log.
press Talk/Speaker Phone to place the call.
Missed Call.
press Talk/Speaker Phone to place the call.
Xfer/Clr to undo typing.
Ringer/Charge
/Message Indicator
Headset Jack
Soft Keys
Talk/Speaker Phone
Hold/Msg
Microphone
Up/Down to adjust
Incoming Log.
Power/Cancel
(Transfer/Clear)
Using MessageBank
• Dial 101 and follow the
prompts to customise your
settings or listen to your
messages.
The Message Indicator will flash
red if there are new messages.
Save a contact to the
Phonebook
Each handset has its own
phonebook which will need to
be set up for each phone.
• Use the soft key to select
Menu.
• Use navigation keys to scroll
to New Phonebook and use
soft key to select OK.
• Use the keypad 'Enter Name'
of contact and use soft key to
select OK.
• Use the navigation keys to scroll
to the desired line entry and use
the soft key to select OK.
• Use the keypad to 'Enter Phone
No' and use soft key to select OK.
• When you have completed
all entries for a contact, use
the soft key to select SAVE.
Important – If you don't select
SAVE before exiting the directory,
your changes will not be saved.
Receiver
Navigation
Keys
Xfer/Clr
Function
®