Add_Transport_Udp_N - Panasonic KX-TGP600 Administrator's Manual

Default Value

ADD_TRANSPORT_UDP_n

Parameter Name Example
Value Format
Description
Value Range
Default Value
SIP_ADD_DIVERSION_n
Parameter Name Example
Value Format
Description
Value Range
Default Value
TRANSFER_RECALL_TIM
Value Format
Description
Value Range
Default Value
SIGNAL_COMPRESSION_n
Parameter Name Example
Value Format
Description
Document Version 2017-07
N
ADD_TRANSPORT_UDP_1, ADD_TRANSPORT_UDP_2, ...,
ADD_TRANSPORT_UDP_8
BOOLEAN
Specifies whether to add the attribute "transport=udp" to the SIP header
URI.
•
Y (Add Transport UDP)
•
N (Do not add Transport UDP)
N
SIP_ADD_DIVERSION_1, SIP_ADD_DIVERSION_2, ...,
SIP_ADD_DIVERSION_8
INTEGER
Specifies whether to add Diversion header information.
0–2
–
0: Do not add Diversion header information
–
1: Use own diversion information only for the Diversion header
–
2: Add diversion information to existing Diversion header
0
INTEGER
Specifies the time that the original call is resumed when the forwarding
party does not response by Refer method for call transfer.
0, 1–240
0
SIGNAL_COMPRESSION_1, SIGNAL_COMPRESSION_2, ...,
SIGNAL_COMPRESSION_8
INTEGER
Specifies whether to use signal compression. When using signal
compression, select Required or Supported.
5.3.22 SIP Settings
Administrator Guide 287