Firmware File URL
Description
Value Range
Default Value
Configuration File Reference
4.7.3 Upgrade Firmware
This screen allows you to download the Upgrade Firmware data from a PC.
Note
•
After the firmware has been successfully updated, the unit will restart automatically.
4.7.3.1 Upgrade Firmware
File Name
Description
Value Range
Default Value
Document Version 2017-07
Specifies the URI where the firmware file is stored.
Note
•
This setting is available only when [Enable Firmware
Update] is set to [Yes].
Max. 384 characters
Note
•
If "{fwver}" is included in this parameter, it will be replaced with
the value specified in [Firmware Version]. For details about
the formats, see 2.1.3 Server Address Formats.
Not stored.
FIRM_FILE_PATH (Page 226)
Specifies the path of the firmware file to be imported.
No limitation
Note
•
There are no limitations for the field entry. However, it is
recommended that paths of less than 256 characters be used:
longer paths may cause longer data transfer times and result in
an internal error.
Not stored.
4.7.3 Upgrade Firmware
Administrator Guide
173