Maximum RTP Port Number
Description
Value Range
Default Value
Configuration File Reference
Telephone-event Payload Type
Description
Value Range
Default Value
Configuration File Reference
4.5.3.2 Voice Quality Report
Server Address
Description
Value Range
Default Value
Configuration File Reference
Port
Description
Value Range
Default Value
Configuration File Reference
Enable PUBLISH
Description
Document Version 2017-07
Specifies the highest port number that the unit will use for RTP packets.
1424–59998 (even number only)
20000
RTP_PORT_MAX (Page 304)
Specifies the RFC 2833 payload type for DTMF tones.
Note
•
This setting is available only when [DTMF Type] is set to
[RFC2833].
96–127
101
TELEVENT_PAYLOAD (Page 290)
Specifies the IP address or FQDN of the collector server.
Max. 256 characters
Not stored.
VQREPORT_COLLECTOR_ADDRESS (Page 308)
Specifies the port of the collector server.
1–65535
5060
VQREPORT_COLLECTOR_PORT (Page 308)
Selects the sending type of the VQ report using PUBLISH.
4.5.3 VoIP Settings
Administrator Guide
141