DIAL_PLAN_NOT_MATCH_ENABLE_n
Parameter Name Example
Value Format
Description
Value Range
Default Value
Web User Interface Reference
MACRODIGIT_TIM
Value Format
Description
Value Range
Default Value
Web User Interface Reference
INTERNATIONAL_ACCESS_CODE
Value Format
Description
Value Range
Default Value
Web User Interface Reference
Document Version 2017-07
DIAL_PLAN_NOT_MATCH_ENABLE_1,
DIAL_PLAN_NOT_MATCH_ENABLE_2, ...,
DIAL_PLAN_NOT_MATCH_ENABLE_8
BOOLEAN
Specifies whether to enable dial plan filtering so that a call is not made
when the dialed number does not match any of the dial formats
specified in "DIAL_PLAN_n".
•
Y (Enable dial plan filtering)
•
N (Disable dial plan filtering)
Note
•
If set to "Y", the dialed number will not be sent to the line when
the number dialed by the user does not match any of the dial
formats specified in the dial plan.
•
If set to "N", the dialed number will be sent to the line, even if
the number dialed by the user does not match any of the dial
formats specified in the dial plan.
N
Call Even If Dial Plan Does Not Match (Page 161)
INTEGER
Specifies the length of time, in seconds, that the unit waits when a "T"
or "t" has been entered in the dial plan.
1–15
5
Timer for Dial Plan (Page 152)
STRING
Specifies the number to be shown in the place of the first "+" symbol
when the phone number for incoming international calls contains "+".
Max. 8 characters (consisting of 0–9, *, and #)
Note
•
No other characters are allowed.
Empty string
International Call Prefix (Page 153)
5.3.32 Call Control Settings
Administrator Guide
339