Web User Interface Reference
RTCP_ENABLE_n
Parameter Name Example
Value Format
Description
Value Range
Default Value
Web User Interface Reference
RTCP_INTVL_n
Parameter Name Example
Value Format
Description
Value Range
Default Value
Web User Interface Reference
RTCP_SEND_BY_SDP_n
Parameter Name Example
Value Format
Description
Value Range
Default Value
Document Version 2017-07
RTP Packet Time (Page 140)
RTCP_ENABLE_1, RTCP_ENABLE_2, ..., RTCP_ENABLE_8
BOOLEAN
Specifies whether to enable or disable RTCP (Real-Time Transport
Control Protocol). For details, refer to RFC 3550.
•
Y (Enable RTCP)
•
N (Disable RTCP)
N
Enable RTCP (Page 146)
RTCP_INTVL_1, RTCP_INTVL_2, ..., RTCP_INTVL_8
INTEGER
Specifies the interval, in seconds, between RTCP/RTCP-XR packets.
5–65535
5
RTCP&RTCP-XR Interval (Page 147)
RTCP_SEND_BY_SDP_1, RTCP_SEND_BY_SDP_2, ...,
RTCP_SEND_BY_SDP_8
INTEGER
Specifies whether to send RTCP signals by SDP (Session Description
Protocol).
0–1
–
0: Send RTCP signals using the value specified in
"RTCP_INTVL_n", if the "RTCP_ENABLE_n" parameter is enabled.
–
1: Send RTCP signals using the value specified in the SDP attribute
"a=rtcp:".
0
5.3.26 RTP/RTCP/RTCP-XR Settings
Administrator Guide
305