Changing The Language For Web User Interface Programming - Panasonic KX-TGP600 Administrator's Manual

1.1.6 Web User Interface Programming
Notice
•
You should manage the passwords carefully, and change them regularly.

1.1.6.2 Changing the Language for Web User Interface Programming

When accessing the unit via the Web user interface on a PC connected to the same network, various menus
and settings are displayed. You can change the language used for displaying these setting items. Because
the language setting for the Web user interface is not synchronized with those of the unit, you must set the
languages for each independently.
For details, see 4.4.2 Language Settings.
1.1.6.3 Before Accessing the Web User Interface
Recommended Environment
This unit supports the following specifications:
HTTP Version
Authentication Method
The Web user interface will operate correctly in the following environments:
Operating System
Web Browser
Language (recommended)
Opening/Closing the Web Port
To access the Web user interface, you must open the unit's Web port beforehand. For details, refer to the
Operating Instructions on the Panasonic Web site (® see Introduction).
Configuring Settings from the Unit
To open the unit's Web port
1.
/
2.
[ ]/[ ]/[ ]/[ ]:
3. [ ]/[ ]: "Other Option" ®
4. [ ]/[ ]: "Embedded Web" ®
5. [ ]/[ ]: "On" for "Embedded Web" ®
30 Administrator Guide
HTTP/1.0 (RFC 1945), HTTP/1.1 (RFC 2616)
Digest
Microsoft
®
Windows Internet Explorer
Internet Explorer 9, Windows Internet Explorer 10, Windows Internet
Explorer 11 web browser, Firefox® (32.0.3), Google Chrome™
(37.0.2062.103)
English
®
OK
OK
OK
OK
Windows 7 or Windows 8 operating system
®
7, Windows Internet Explorer 8, Windows
®
Document Version 2017-07