4.2
iUR250
4.2.1 KIOSK PREPARATION FOR iUR250 INSTALLATION
The iUR250 requires a cut-out in the kiosk. Dimensions in mm
detailed in the diagram below.
iUR250
footprint area
iUR250
Anti-removal
switches area
Cut-out drawing for iUR250
EVA EPS compact cut-out (rear mounting).
3D design is available on demand.
CAUTION
The equivalent iUR250 hatched footprint s urface on the
kisok must be flat and clear of any holes and burrs.
Special attention is required for the area of the anti-removal
switches.
Fixing must be done by 4 M4 to M6 × 12 mm welded studs.
19