Displaying Ie 3000 Switch Alarms Status - Cisco IE 3000 Software Configuration Manual

Displaying IE 3000 Switch Alarms Status

Beginning in privileged EXEC mode, follow these steps to enable the switch to send alarm traps:
Command
Step 1
configure terminal
Step 2
snmp-server enable traps alarms
Step 3 end
Step 4 show alarm settings
Step 5
copy running-config startup-config (Optional) Save your entries in the configuration file.
Displaying IE 3000 Switch Alarms Status
To display the global and port alarm status, use one or more of the privileged EXEC commands in
Table
Table 3-5 Commands for Displaying Global and Port Alarm Status
Command
show alarm description port
show alarm profile [name]
show alarm settings
show env {all | power | temperature}
show facility-alarm status [critical | info |
major | minor]
Cisco IE 3000 Switch Software Configuration Guide
3-12
Purpose
Enter global configuration mode.
Enable the switch to send SNMP traps.
Return to privileged EXEC mode.
Verify the configuration.
3-5:
Purpose
Displays an alarm number and its text description.
Displays all alarm profiles in the system or a specified profile.
Displays all global alarm settings on the switch.
Displays the status of environmental facilities on the switch.
Displays generated alarms on the switch.
Chapter 3 Configuring Cisco IE 3000 Switch Alarms
OL-13018-01