Setting A Secondary Temperature Threshold For The Switch; Associating The Temperature Alarms To A Relay - Cisco IE 3000 Software Configuration Manual

Chapter 3 Configuring Cisco IE 3000 Switch Alarms

Setting a Secondary Temperature Threshold for the Switch

You can use the alarm facility temperature secondary global configuration command to set the low
and high temperature thresholds for the secondary temperature monitoring alarm.
Beginning in privileged EXEC mode, follow these steps to set the low temperature threshold:
Command
Step 1 configure terminal
Step 2 alarm facility temperature
secondary high threshold
Step 3 alarm facility temperature
secondary low threshold
Step 4 end
Step 5
show alarm settings
Step 6
copy running-config startup-config (Optional) Save your entries in the configuration file.
Use the no alarm facility temperature secondary threshold global configuration command to disable
the secondary temperature threshold alarm.
This example disables the secondary temperature threshold alarm.
Switch(config) # no alarm facility temperature secondary 45

Associating the Temperature Alarms to a Relay

By default, the primary temperature alarm is associated to the major relay. You can use the alarm facility
temperature global configuration command to associate the primary temperature alarm to the minor
relay, to an SNMP trap, to a syslog message, or to associate the secondary temperature alarm to the major
or minor relay, an SNMP trap, or a syslog message.
Beginning in privileged EXEC mode, follow these steps to associate the secondary temperature alarm to
a relay:
Command
Step 1
configure terminal
Step 2 alarm facility temperature
{primary | secondary} relay {major
| minor}
Step 3
alarm facility temperature
{primary | secondary} notifies
Step 4
alarm facility temperature
{primary | secondary} syslog
Step 5
end
Step 6 show alarm settings
Step 7 copy running-config startup-config (Optional) Save your entries in the configuration file.
OL-13018-01
Purpose
Enter global configuration mode.
Set the secondary high temperature threshold value. Set the threshold from
–238°F (–150°C) to 572°F (300°C).
Set the secondary low temperature threshold value. Set the threshold from
–328°F (–200°C) to 482°F (250°C).
Return to privileged EXEC mode.
Verify the configuration.
Purpose
Enter global configuration mode.
Associate the primary or secondary temperature alarm to a relay.
Send primary or secondary temperature alarm traps to an SNMP server.
Send primary or secondary temperature alarm traps to a syslog server.
Return to privileged EXEC mode.
Verify the configuration.
Cisco IE 3000 Switch Software Configuration Guide
Configuring IE 3000 Switch Alarms
3-7