Displaying The Sdm Templates - Cisco IE 3000 Software Configuration Manual

Chapter 8 Configuring SDM Templates
Command
Step 3
end
Step 4 reload
After the system reboots, you can use the show sdm prefer privileged EXEC command to verify the new
template configuration. If you enter the show sdm prefer command before you enter the reload
privileged EXEC command, the show sdm prefer command shows the template currently in use and the
template that will become active after a reload.

Displaying the SDM Templates

.
Use the show sdm prefer privileged EXEC command with no parameters to display the active template.
Use the show sdm prefer [default | qos] privileged EXEC command to display the resource numbers
supported by the specified template.
OL-13018-01
Purpose
Return to privileged EXEC mode.
Reload the operating system.
Cisco IE 3000 Switch Software Configuration Guide
.Displaying the SDM Templates
8-3