Enabling Or Disabling Igmp Snooping - Cisco IE 3000 Software Configuration Manual
Hide thumbs
Also See for IE 3000:
- Hardware installation manual (186 pages) ,
- Getting started manual (32 pages) ,
- Software configuration manual (874 pages)
Table of Contents
Advertisement
Chapter 21
Configuring IGMP Snooping and MVR
Table 21-3
Feature
IGMP snooping querier
IGMP report suppression
1. TCN = Topology Change Notification
Enabling or Disabling IGMP Snooping
By default, IGMP snooping is globally enabled on the switch. When globally enabled or disabled, it is
also enabled or disabled in all existing VLAN interfaces. IGMP snooping is by default enabled on all
VLANs, but can be enabled and disabled on a per-VLAN basis.
Global IGMP snooping overrides the VLAN IGMP snooping. If global snooping is disabled, you cannot
enable VLAN snooping. If global snooping is enabled, you can enable or disable VLAN snooping.
Beginning in privileged EXEC mode, follow these steps to globally enable IGMP snooping on the
switch:
Command
Step 1
configure terminal
Step 2
ip igmp snooping
Step 3
end
Step 4
copy running-config startup-config
To globally disable IGMP snooping on all VLAN interfaces, use the no ip igmp snooping global
configuration command.
Beginning in privileged EXEC mode, follow these steps to enable IGMP snooping on a VLAN interface:
Command
Step 1
configure terminal
Step 2
ip igmp snooping vlan vlan-id
Step 3
end
Step 4
copy running-config startup-config
To disable IGMP snooping on a VLAN interface, use the no ip igmp snooping vlan vlan-id global
configuration command for the specified VLAN number.
OL-13018-01
Default IGMP Snooping Configuration (continued)
Purpose
Enter global configuration mode.
Globally enable IGMP snooping in all existing VLAN interfaces.
Return to privileged EXEC mode.
(Optional) Save your entries in the configuration file.
Purpose
Enter global configuration mode.
Enable IGMP snooping on the VLAN interface.The VLAN ID range
is 1 to 1001 and 1006 to 4094.
IGMP snooping must be globally enabled before you can
Note
enable VLAN snooping.
Return to privileged EXEC mode.
(Optional) Save your entries in the configuration file.
Default Setting
Disabled
Enabled
Cisco IE 3000 Switch Software Configuration Guide
Configuring IGMP Snooping
21-7
Advertisement
Chapters
Table of Contents
Troubleshooting
