Cleaning Instructions - Barco MDSC-8532 User Manual

Immunity to RF wireless communications equipment
Test
frequency Band (MHz)
(MHz)
385 380 – 390
450 430 – 470
710 704 – 787
745
780
810 800 – 960
870
930
1720 1700 – 1990
1845
1970
2450 2400 – 2570
5240 5100 – 5800
5500
5785

6.7 Cleaning instructions

To clean the display
Apply a cleaning/disinfecting product to a soft lint-free cloth, such as a microfiber or gauze and rub the display
surface thoroughly. In order to be effective, all surfaces must be cleaned for a certain amount of time (ranging
from 30 seconds to 2 minutes).
Use a cleaning/disinfecting product that is alcohol-, alkali-, water- or chlorine-based. Common examples are:
• Isopropanol 90%
• Ethanol 70%
• 250 ppm Chlorine solution
• 1.6% aqueous ammonia
• "Green soap" (USP)
• 0.5% Chlorehexidine in 70% isopropyl alcohol
• Products similar to optical cleaning liquid (e.g. Wurth TFT-Reiniger)
• Flux
• Sodium hypochlorite 10%
Service Modulation
TETRA 400 Pulse
modulation
18 Hz
GMRS 460, FM ± 5 kHz
FRS 460 deviation
1 kHz sine
LTE Band Pulse
13, 17 modulation
217 Hz
GSM 800/ Pulse
900, TETRA modulation
800, iDEN 18 Hz
820, CDMA
850, LTE
Band 5
GSM 1800, Pulse
CDMA 1900, modulation
GSM 1900, 217 Hz
DECT, LTE
Band 1/3/4/
25, UMTS
Bluetooth, Pulse
WLAN, modulation
802.11 b/g/n, 217 Hz
RFID 2450,
LTE Band 7
W LAN Pulse
802.11 a/n modulation
217 Hz
Important information
Maximum Distance
power (W) (m)
1.8 0.3
2 0.3
0.2 0.3
2 0.3
2 0.3
2 0.3
0.2 0.3
R5914105 /01 MDSC-8532
Immunity
test level (V/
m)
27
28
9
28
28
28
9
51