Table of Contents
Advertisement
Helix 5 Device.fm Page 6 Tuesday, June 5, 2007 5:24 PM
Key Charts
Key
Function
Use SETUP for all programming
sequences. Also use to turn
backlighting on and off, if applicable.
Press POWER once to turn on or off a
home entertainment device. For
MASTER POWER control, see "Using the
Master Power Key" on page 21.
Press TV, DVD/VCR, SAT, or AUX once to
select a home entertainment device to
control. Also see "Device Table" on
page 7.
Each device key has an embedded LED
(red light) that blinks upon selection
and indicates the remote control is
working and (after programming) is
sending signals.
Use ALL/GUIDE to display the program
guide.
Use INFO to display the current channel
and program information.
Use the Cursor keys to move the cursor
in the program guide and menu screens
and to navigate within the interactive
service.
Use OK to choose options, PPV events,
and to tune to programs from the
program guide.
Use EXIT to exit out of your cable
converters menu and guide.
Use VOL+ (or VOL-) to raise (or lower)
the audio volume.
Use BRIGHT or DIM to control the
brightness level of your lights.
Use CH+ (or CH-) to select the next
higher (or lower) channel.
For DVD players, use these keys to skip
forward (or reverse) through chapters.
For amplifiers/receivers, use these keys
to select the next higher (or lower)
preset station.
Use ON or OFF to turn your Z-wave
compatible devices on or off.
www.urcsupport.com
6
Advertisement
Table of Contents
