Universal Electronics C4000 User Manual

FUNCTION KEY CHART
System ON/OFF
Use SYSTEM ON/OFF to control the Master Power macro.
MENU
Displays the Applications menu.
Charter OCAP 4-Device
GUIDE
Displays the on-screen program guide.
Remote Control
PAGE UP/DOWN
Use PAGE+ (or PAGE-) to page up (or page down)
through menu screens andthe program guide.
EXIT
Used to exit menus, guides, and on-screen applications.
DAY+/-
Skip forward or backward one day in the program
guide.
VOL+/-
Raises and lowers audio levels.
MUTE
Press MUTE once to turn the sound off or on.
Replay the previous 15 seconds of a program
MY DVR
Displays a list of programs you have recorded.
INPUT
Press SHIFT to access additional cable features.
In TV, DVD, AUX use INPUT to cycle through the available
inputs on the selected device
PIP-ON/OFF
Use PIP ON-OFF to switch the Picture-In-Picture feature
on or off.
PIP SWAP
Use PIP SWAP to switch images and sound between
the main and window pictures
VIDEO SOURCE
Use to select the video source options on
your cable converter
PIP MOVE, PIP +/-
Use PIP MOVE to move the window picture
to different positions in the main picture.
Use PIP CH+ (or CH-) to select the next higher (or
lower) PIP channel.
1. Turn on a device and, if applicable, insert video media, (e.g.,
cassette or disc).
NOTE: Please read steps 2 through 4 completely before proceeding.
Highlight or write down the codes and device you wish to program
before moving on to step 2.
2. On the remote control, press a device key once (i.e., AUX, DVD, TV,
CBL, or STB); it blinks once. Then press and hold SET UP until the
selected mode key blinks twice.
3. Use the "Setup Codes for Televisions" on page 2) to locate the
type of device and brand name and then enter the first five-digit
code for your device. If performed correctly, the selected mode
key blinks twice.
NOTE: If the selected mode key emits a long blink, the entry is invalid.
Repeat steps 2 through 3 and try entering the same code again.
Universal Electronics, Inc.
4. Aim the remote control at the device and press POWER once. The
device should turn off. If it does not, repeat steps 2 through 3,
www.urcsupport.com
trying each code for your brand until you find one that works. If
it still does not respond, try searching for the code (see

"Searching for Your Code").

INTRODUCTION NOTE: If the device does not have a POWER key, press the  (Play) key.
Repeat steps 1 through 4 for each device you want the remote control to
The C4000 Remote Control by Universal Electronics is our latest operate. For future reference, write down each working device code in
generation universal remote control. Their sophisticated technology the boxes below.
allows you to consolidate up to four of your original home AUX Code
entertainment remote controls into one easy-to-use product. Please
follow the instructions detailed in this manual to set up the unit and
then start enjoying your new remote control and cable service.
Device Type:___________________

INSTALLING BATTERIES

DVD Code
1. On the back of the remote control, push the tab and lift off the
battery cover.
2. Locate the two (2) enclosed AA batteries. Match the + and -
Device Type:___________________
marks with those in the battery case, then insert them.
CBL Code
3. Align the cover's keys with the case's holes and press the cover
back into place. The tab should click when the cover is locked.
4. Test the remote control by pressing any mode key (e.g., TV). If the
batteries are inserted correctly, the LED (red light) blinks once.
NOTE: When batteries need replacement, the remote control ceases to Device Type:___________________
operate. Replace the batteries and the unit will be restored to its full TV Code
functionality, complete with your favorite settings.
Device Type:___________________

SETTING UP A COMBO UNIT

If you own a combo unit such as a TV/DVD Combo or a TV/VCR
Combo, you need to follow special steps to set it up. Perform the
following instructions to control combo device:
1
1. For a TV/DVD Combo, turn on your TV/DVD Combo and insert
a DVD. (For a TV/VCR Combo, insert a videocassette).
2. On the remote control, press DVD once; it blinks once. Then press
and hold SET UP until the DVD key blinks twice.
3. Use the "Setup Codes for Televisions" starting on page 2 to locate
the brand name and enter the first five-digit code for your combo
device (for example, TV/VCR). If you perform this procedure
correctly, the DVD key blinks twice.
2
NOTE: If the DVD key did not blink twice after entering the code's last
digit, repeat steps 2 through 3 and try entering the same code again.
If you've located a setup code that works for your combo device (for
example, a TV/DVD Combo) and a separate TV code is also listed,
you'll need to program this code into the remote control to access
volume control (See "Programming Device Control").
4. Aim the remote control at your combo device (for example, TV/
3
DVD Combo) and press POWER once. The device should turn off.
If it does not respond, repeat steps 2 through 3, trying each code
listed for your brand until you find one that works. If it still does
not respond, try searching for the code (See "Searching for Your

PROGRAMMING DEVICE CONTROL

Code").
5. For future reference, write down each working device code in the
The C4000 Remote Control is preprogrammed to operate the cable box boxes below:
(converter) provided by your cable system, an RCA TV, a Toshiba DVD TV/VCR or TV/DVD Code
player, and a Pioneer audio receiver. To control devices other than the
default brands, perform the following steps; otherwise skip this
section.
NOTES: For control of a Combo device (for example, a TV/VCR TV Code (if used)
combo), skip this section and perform the instructions on "Setting Up
a Combo Unit". Also refer to "Function Key Chart" on this page to find
out which devices can be programmed onto each device key.
SET UP
Use for all programming sequences.
POWER
Press POWER once to turn on or off a home entertainment device.
AUX, DVD, TV, CBL
Selects the device you wish to operate and signals remote control activity.
INFO
Use INFO to display the current channel and program information.
CURSOR KEYS
Use the Cursor keys to move the cursor in the program guide and menu screens
and to navigate within the interactive service.
LAST
Press LAST once to recall the last channel.
OK/SELECT
Use OK/SELECT to choose options, PPV events, and to tune to programs from the
program guide.
A, B, C, D
Use A, B, C, or D to access additional cable features (see your cable converter's
manual).
CH UP/DOWN
Use CH+ (or CH-) to select the next higher (or lower) channel.
ON DEMAND
Press ON DEMAND to access Video on Demand services. This is also a
programmable macro key.
FAV
Displays favorite channels.
LIVE
Press LIVE to command your PVR/DVR cable box to return to watching live TV.
PLAYBACK KEYS
Perform standard VCR and DVD f unctions when in VCR and DVD mode, and
Video-On-Demand functions when in CABLE mode.
NUMERIC KEYS
Use the keypad numbers (1-9, and 0) to directly tune channels (e.g., 09).
ASPECT
Alters the aspect ratio (4:3 or 16:9) configuration of set top box.
SEARCHING FOR YOUR CODE Unlocking Volume Control for a Single Device (Individual Volume
Unlock)
If your home entertainment device does not respond to the C4000 1. Assuming Global Volume Lock is active, select a mode on the
Remote Control after trying all of the codes listed for your brand, or if remote control that you want to unlock (e.g., CBL) and press it
your brand is not listed at all, try searching for your code. once. Next, press and hold SET UP until the device key blinks
NOTE: Use the following device code digits to control a specific device: twice.
0 = Cable (dedicated to cable only) 2. Enter 9 9 3. The last-selected device key blinks twice.
Press VOL- once. The last-selected device key blinks four times.
1 = TV 3.
4. Repeat steps 1 through 3 for each device you want volume to be
2 = DVD/VCR
unlocked.
3 = Audio
Now, after you select a device that has volume unlocked (e.g., CBL),
For example, to search for a code for your TV:
pressing VOL+, VOL-,or MUTE, controls only that device's volume.
1. Turn on your TV.
2. On the remote control, press TV once; it blinks once. Then press Unlocking All Volume Control (Global Volume Unlock)
and hold SET UP until the TV key blinks twice.
NOTE: Performing these instructions sets independent volume control
Enter 9 9 1. The TV key blinks twice.
3.
for all programmed devices.
4. Press 1 (the device code digit for your TV). The TV key blinks
On the remote control, press and hold SET UP until the last-
1.
twice. Aim the remote control at the TV and press POWER once.
selected device key blinks twice.
5. Press and release the CH+ key continuously, then stop when the
2. Enter 9 9 3. The last-selected device key blinks twice.
TV turns off.
3. Press VOL+ once. The last-selected device key blinks four times.
NOTE: In the search mode, the remote control sends IR codes from its
Locking Volume Control To One Mode (Global Volume Lock)
library to the selected device, starting with the most popular code first.
1. On the remote control, press and hold SET UP until the last-
6. Press POWER. The TV should turn on, then press SET UP to lock
selected device key blinks twice.
in the code.
2. Enter 9 9 3. The last-selected device key blinks twice.
NOTE: If the TV does not turn on during step 6, then slowly press and
3. Select a mode (e.g., TV or AUX) which you want to use to control
release CH- to go back through the codes, then press SET UP when the
the volume. The selected device key blinks twice.
TV turns on.
Now, when you press VOL+, VOL-,or MUTE, the volume of the selected
7. To search for the codes of your other devices, repeat steps 1
device (e.g., TV) is controlled regardless of mode.
through 5, but substitute the appropriate key (e.g., AUX, DVD,
CBL, or STB) for the device you are searching for.

USING THE SYSTEM ON/OFF KEY

CHECKING THE CODES

1. Press SYSTEM ON/OFF once. Your devices turn on or off in the
pre-programmed sequence.
If you have set up the C4000 Remote Control by searching for your
NOTE: Only devices you have programmed the remote to control turn
device code, you may need to find out which five-digit code is operating
on or off sequentially. For example, if you have programmed control of
your equipment.
your TV, but not your DVD player, SYSTEM ON/OFF does not turn your
For example, to find out which code is operating your TV:
DVD player on or off.
1. On the remote control, press TV once; it blinks once. Then press
and hold SET UP until the TV key blinks twice.
USING KEYMOVER
Enter 9 9 0. The TV key blinks twice.
2.
3. To view the code for the first digit, press 1 once. Count the
The C4000 Control includes a Keymover feature that allows you to map
number of times the TV key blinks (e.g., 3 blinks = 3) and write
(or copy) keys from one mode (i.e., source mode) to another mode (i.e.,
down the number in the leftmost TV Code box above.
destination mode).
NOTE: If a code digit is 0, the selected mode key does not blink.
Programming Keymover
4. Repeat step 3 four more times for the remaining digits. Use 2 for
For example, if your DVD player does not have volume control, you can
the second digit, 3 for the third digit, 4 for the fourth digit, and 5
map those keys (i.e., VOL+, VOL-, and MUTE) from the TV mode to DVD
for the fifth digit. Finish writing down the code in the TV Code
mode as follows:
boxes above.
1. On the remote control, press CBL (or STB) once; it blinks once.
To check for other device codes, repeat steps 1 through 4, but substitute
Then press and hold SET UP until the CBL (or STB) key blinks
the appropriate key (e.g., AUX, DVD, CBL, or STB) for the device you are
twice.
checking. Write down the codes in the appropriate boxes above.
2. Enter 9 9 4. The CBL (or STB) key blinks twice.

PROGRAMMING CHANNEL CONTROL LOCK

3. For the source mode, press a desired device key once (i.e., AUX,
TV, DVD, CBL or STB). For this example, press TV once.
By default, the remote control's channel-control capabilities are locked 4. For the source key, press a key to be moved once. For this
to the cable converter. The affected keys are 1 through 0, CH+, CH-, and example press VOL- once.
LAST. This guarantees that you do not inadvertently change a channel 5. For the destination mode, press a desired device key once (i.e.,
AUX, TV, DVD, or CBL or STB). For this example, press DVD once.
on your TV or VCR. However, you can de-activate this feature to allow
6. For the destination key, press a key to be moved once. For this
full access to these keys in the TV and VCR modes.
example press VOL+ once.
Unlocking Channel Control
7. Repeat steps 1 to 6 to move additional keys. For this example,
1. On the remote control, press CBL (or STB) once; it blinks once.
repeat steps 1 to 6 two more times to map the remaining volume
Press and hold SET UP until the CBL (or STB) key blinks twice.
control keys, substituting VOL- and MUTE as source and
2. Enter 9 7 3. The CBL (or STB) key blinks twice.
destination keys in steps 4 and 6.
3. Press CH- once. The CBL (or STB) key blinks four times.
Upon completion of the above procedure, you can now use your C4000
Now the remote control provides TV and VCR channel-control
Remote Controls to control the TV's volume and mute in the DVD mode,
capabilities while in the TV or VCR mode.
as well as in the TV mode.
Locking Channel Control to CBL
Restoring All Keymover Keys in a Single Mode
1. On the remote control, press CBL (or STB) once; it blinks once.
On the remote control, press CBL or STB once; it blinks once.
1.
Press and hold SET UP until the CBL (or STB) key blinks twice.
Then press and hold SET UP until the CBL key blinks twice.
2. Enter 9 7 3.The CBL (or STB) key blinks twice.
2. Enter 9 9 4. The CBL (or STB) key blinks twice.
3. Press CH+ once. The CBL key blinks once.
3. Press and release the mode key you want to clear twice. For
4. Press CBL once. The CBL key blinks twice.
example, to clear all Keymover keys for the TV mode, press and
Now, regardless of what mode you select, the channel keys only change
release TV twice.
channels on your cable converter.
Restoring a Single Keymover Key

CHANGING VOLUME LOCK

1. On the remote control, press the MODE key once.
2. Press and hold SET UP until the last-selected mode key blinks
Volume Lock allows you to control the volume through the device
twice (for example, TV).
identified as having your primary speaker(s), regardless of which mode
3. Enter 9 9 4. The mode key blinks twice.
you are using. On the C4000 Remote Control, Global Volume Lock is set
Press and release the device key twice. For example, to clear the CH+
to TV, so you can control TV volume while in the AUX, DVD, TV or CBL key in TV mode, press and release CH+ twice.
mode. You can perform Individual Volume Unlock on a selected device
to set its volume control for independent operation.

CLEARING CUSTOM PROGRAMMING

Curtis Mathes
The C4000 Remote Control contains a Custom Programming Reset
program. You can use it to remove all custom programming.
CXC
IMPORTANT: Executing this programming sequence will erase all
Daewoo
custom programmed settings such as Volume Lock, Channel Control
Lock and Keymover. However, your device programming remains the Dell
same.
Denon
1. On the remote control, press and hold SET UP until the last-
Digital Lifestyles
selected device key blinks twice.
2. Enter 9 8 0. The last-selected device key blinks twice, pauses, DirecTV
and blinks twice again to confirm that all custom programming
Dish Network
is cleared.
Disney

TROUBLESHOOTING

Dumont
Durabrand
PROBLEM: Device key does not blink when you press a key.
Dynex
SOLUTION: Replace the batteries with two (2) new AA batteries (See
"Installing Batteries").
Electroband
PROBLEM: Device key blinks when you press a key, but home
entertainment device does not respond. Electrograph
SOLUTION: Make sure you are aiming the remote control at your home
Electrohome
entertainment device and that you are within 15 feet of the device you
Element
are trying to control.
Emerson
PROBLEM: The remote control does not control home entertainment
devices or commands are not performing properly.
SOLUTION: Try all listed codes for the device brand being set up. Make
Emprex
sure all devices can be operated with an infrared remote control.
PROBLEM: TV/VCR Combo does not respond properly.
Envision
SOLUTION: Use the VCR codes for your brand. Some combo units may
Epson
require both a TV code and a VCR code for full operation.
ESA
PROBLEM: No volume on a second TV.
Fujitsu
SOLUTION: Follow instructions under "Changing Volume Lock".
Funai
PROBLEM: Remote control does not turn on Sony or Sharp TV/VCR
Combo.
Futuretech
SOLUTION: For power on, these products require programming TV
Gateway
codes on the remote control. For Sony, use TV code 10000 and VCR
GE
code 20032. For Sharp, use TV code 10093 and VCR code 20048.
FCC NOTICE
GFM
Gibralter
This equipment has been tested and found to comply with the limits for
Go Video
a class B digital device, pursuant to part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful GoldStar
interference in a residential installation. This equipment generates,
Grundig
uses and can radiate radio frequency energy and if not installed and
Grunpy
used in accordance with the instructions, may cause harmful
interference to radio communications. Haier
However, there is no guarantee that interference will not occur in a
Hallmark
particular installation. If this equipment does cause harmful
Hanns.G
interference to radio or television reception, which can be determined
by turning the equipment off and on, the user is encouraged to try to Hannspree
correct the interference by one or more of the following measures:
Harman/Kardon
• Reorient or relocate the receiving antenna.
Harsper
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that Harvard
to which the receiver is connected.
Havermy
• Consult the dealer or an experienced radio/TV technician for help.
Helios
This equipment has been verified to comply with the limits for a class B
Hello Kitty
computing device, pursuant to FCC Rules. In order to maintain
compliance with FCC regulations, shielded cables must be used with
Hewlett Packard
this equipment. Operation with non-approved equipment or
Hisense
unshielded cables is likely to result in interference to radio and TV
reception. The user is cautioned that changes and modifications made
Hitachi
to the equipment without the approval of manufacturer could void the
user's authority to operate this equipment.
HP
Humax
ADDITIONAL INFORMATION
Hyundai
This product does not have any user-serviceable parts. Opening the
iLo
case, except for the battery cover, may cause permanent damage to your
Infinity
C4000 Remote Control.
InFocus
For help via the Internet, visit us at:
www.urcsupport.com
Initial
©Copyright 2010 by Universal Electronics Inc. No part of this
Insignia
publication may be reproduced, transmitted, transcribed, stored in any
retrieval system, or translated to any language, in any form or by any
means, electronic, mechanical, magnetic, optical, manual, or
Inteq
otherwise, without prior written permission of Universal Electronics
Inc. IX
US Patents
JBL
6,014,092 5,515,052
JCB
M1060 Rev C
Jensen
MANUFACTURER'S CODES
JVC

Setup Codes for Cable Converters

KDS
Charter 01376, 01877
KEC
Cisco 01877, 01982
KLH
Diego 01187
KTV
Motorola 01376, 01982
LG
Pace 01376, 01877, 01982
Scientific Atlanta 01877
LXI
Setup Codes For Televisions
MAG
Admiral 10093, 10463
Magnavox
Advent 10761, 10783, 10815, 10817, 10842,
11933
Akai 10812, 11675, 10702, 10672, 11207,
Marantz
11903, 11935, 12232
Albatron 10700, 10843
Matsushita
America Action 10180
Maxent
Anam 10180
Megapower
AOC 11365, 11589, 11590, 12014, 12087,
Megatron
12402
Memorex
Aomni 11623
Apex Digital 10156, 10748, 10879, 10765, 10767,
MGA
10890, 11217, 11991, 12397
Midland
Astar 11531, 11738
Mintek
Audiovox 10451, 10180, 10623, 10802, 10846,
Mitsubishi
10875, 11284, 11937, 11951, 11952
Aventura 10171
Monivision
Axion 11937
Motorola
BenQ 11032, 11315
Moxell
Bradford 10180
MTC
Broksonic 10236, 10463, 11935
Multitech
Carver 10054
NAD
Celebrity 10000
NEC
Celera 10765
NetTV
Changhong 10765
Nexus Electronics
Citizen 10060, 11671, 11672, 11935
Nikko
Clarion 10180
Norcent
Coby 11538, 11634, 12306, 12314, 12315,
12338, 12340, 12343, 12344, 12345,
Norwood Micro
12347, 12348, 12350, 12351
NuVision
Commercial Solutions 11447, 10047
Olevia
Contec 10180
Onwa
Craig 10180
Optimus
Crosley 10000, 10054
Optoma
Crown 10180
Optonica
Curtis 12352, 12466
Orion
10047, 10054, 10451, 10093, 10060, Panasonic 10250, 11480, 11457, 10051, 10650,
10702, 10145, 10166, 11661, 11147, 11271, 11291, 11410, 11941, 11946
11347
PARK 12104
10180
Penney 10047, 10156, 10051, 10060, 10178,
10451, 11661, 10623, 10661, 10672 11347
11264, 11080, 11178, 11403, 11863 Petters 11523
10145 Philco 10054, 10171, 11271, 11394, 11963
11765 Philips 11454, 11866, 10054, 10690, 11154,
11744, 11806, 11856, 11867, 12372,
11501
12374
11948
Pioneer 11457, 10166, 10679, 10866, 11260
12152
Planar 11496
10017
Polaroid 11523, 10765, 12425, 12121, 12120,
10463, 10180, 10178, 10171, 11034
12119, 12063, 12002, 11991, 11766,
11463, 11780, 11785, 11810, 12049, 11687, 11538, 11498, 11341, 11314,
12184 11286, 11276, 10865
10000
Portland 10451, 11661
11755, 11623 Prima 10761, 10783, 10815, 10817, 11785,
11933
10463, 11670, 11672
Princeton 10700
11687, 12183
Prism 10051
11864, 10017, 10451, 10236, 10463,
10180, 10178, 10171, 11661, 10623, Proscan 11447, 10047, 11347, 12147, 12256
11394, 11944, 11963
Proton 10178
11422, 11546, 11765
Protron 11320
10813, 11365, 11589, 12014, 12087
Proview 10835, 11401, 11498, 11687
10833
Pulsar 10017
10812, 10171, 11944, 11963
Puneet 11546
10809, 10683, 10853
Quasar 10250, 10051, 10650
10000, 10180, 10171, 11271, 11963
RadioShack 10047, 10180, 10178
10180
RCA 11547, 11447, 10047, 10051, 10093,
11755, 11756 10679, 11047, 11147, 11247, 11347,
11781, 11948, 11953, 11958, 12002,
11447, 10047, 10051, 10451, 10178,
12187, 12247, 12434
11347, 12359
Realistic 10180, 10178
10171, 11963, 12167
RevolutionHD 11623
10017
Runco 10017, 11629
10886
Sampo 11755
10178
Samsung 10812, 10060, 10702, 10178, 10650,
10683
10766, 10814, 11060, 11903, 12051
10180
Sansui 10463, 10171, 11409, 11670, 11892,
11034, 11748, 11749, 11753, 12309
11935
10178
Sanyo 10054, 11142, 12448
11783
Sceptre 10878, 11217, 11360, 11599
11348, 11351, 11745, 11783
Scotch 10178
10054
Scott 10236, 10180, 10178, 11711
11206
Sears 10047, 10054, 10156, 10178, 10171
10180
Seleco 11351
10093
Sharp 10818, 10093, 10688, 10851, 11602,
10865 12360
10451 Sheng Chia 10093
11494, 11502 Sherwood 11399
10748, 11314, 11660, 12098, 12355, Sole 11623
12419
Sony 10000, 10810, 10834, 11317, 11685
11643, 11145, 10145, 10797, 11960
Soundesign 10180, 10178
11494, 11502
Sova 11320, 11952
11501
Soyo 11520, 11546, 11826, 11828
10849
Spectroniq 11498, 11687
11286, 11603, 11684, 11990
Squareview 10171
10054
SSS 10180
12199
Starlite 10180
11603, 11990
Studio Experience 10843
11423, 11564, 10171, 11204, 11517,
SunBrite 11420, 12337
11641, 11660, 11710, 11780, 11892,
Superscan 10093, 10864, 11944
11963, 12002, 12049, 12088, 12417
Supreme 10000
10017
SVA 10748, 10865, 10870, 11963
10877
Sylvania 11864, 10054, 10171, 11271, 11314,
10054
11394, 11886, 11944, 11963
10000
Symphonic 10180, 10171, 11944
10761, 10815, 10817, 11933
Syntax 11610, 11144, 11240, 11331
10463, 10053, 10650, 10731, 11253,
Tandy 10093
11601, 11774, 12271
Tatung 11286, 11756
11498, 11687
Technics 10250, 10051
10180
Techview 10847
10765, 10767
Techwood 10051
10180
Teknika 10054, 10180, 10150, 10060
11423, 10017, 11265, 10178, 10700,
10856, 11178, 11768, 11993, 12358, Telefunken 10702
12424
TMK 10178
10047, 10054, 10156, 10178
TNCi 10017
11498, 11687
Toshiba 11524, 10156, 11256, 11265, 10060,
11454, 11866, 10054, 10051, 10706, 10650, 10822, 10832, 10845, 11156,
10802, 11198, 11254, 11365, 11856, 11356, 11656, 11704, 11935, 11945,
11944, 11963, 11990, 12372 12006
11454, 10054, 10704, 10855, 11154, TruTech 11723, 12066
12447
TVS 10463
10250, 10650
US Logic 11286
11755, 11714
Venturer 11865
10700
Victor 10053
10178, 10145
Vidikron 10054, 11629
10463, 10150, 10178, 10877, 11670,
Vidtech 10178
11892, 11903
Viewsonic 11755, 10797, 10857, 10864, 10885,
10150, 10178
11330, 11578, 11627, 11640, 11742,
10047, 10017, 10051 12014, 12087
Viore 11207, 11684, 11811, 12104, 12352
11603, 11990
11250, 10093, 10150, 10178, 10836, Vizio 11758, 10864, 10885, 11756
10868, 12010
Wards 10054, 10178, 10866, 11156
10700, 10843
Waycon 10156
10093, 10835
Westinghouse 11712, 10451, 10885, 10889, 10890,
10835 11282, 11300, 11577, 12293
White Westinghouse 10463, 11661, 10623
10060
10180 Wyse 11365
Yamaha 10769, 10797, 10833
10156, 10178, 10866, 11156
10704, 10882, 11704, 11797 Zenith 10000, 11423, 10047, 10017, 10463,
11265, 10178, 11145, 10145, 11661
11755
Setup Codes For Televisions (Lcd)
12183
Akai 11675, 11935, 12232
10178
AOC 11365, 11589, 12014, 12087, 12402
10748, 10824, 11365, 11589, 11590,
12110 Aomni 11623
11286 Apex Digital 10890, 11217, 12397
11657, 12158 Astar 11531, 11738
Audiovox 10180, 10802, 10846, 10875, 11284, 11937,
11610, 11144, 11240, 11331
11951, 11952
10180
BenQ 11315
10250, 10166, 10650
Akai 11675, 11935, 12232
11348, 12161
Citizen 11671, 11672, 11935
10093
10236, 10463, 11463