Key Charts - Universal Electronics MILLENNIUM 4 User Manual

Key Charts

The LED (red light) blinks to show that
the re mote control is working and is sendin
signals.
Press AUDIO, VCR, TV, or CBL
once to select a home entertainment component
to control.
Press POWER once to turn on or off the
selected home entertainment component.
Use SETUP for all programming
sequences.
Use the keypad (0 ~ 9) to directly
select channels (e.g., 09 or 31).
Press MUTE once to turn sound off or
on.
Press ENTER once after entering
channel numbers on some TV models.
Use volume (or volume
+
lower) the sound volume.
Use CH + (or CH -) to select the next higher
(or lower) channel.
Press LAST once to recall the last
channel and to page back one screen in t
main menu.
Use FAV to cycle through your favorite
channels that are stored in your cable
converter.
Use GUIDE to display the program
guide.
Press PPV/LOCK once to display the
pay per view menu or to lock out a
specific channel on your cable converter.
Use EXIT to exit out of your cable
converter's menu and guide.
5
g
) to raise (or
-
he
Key Charts (continued)
Use cursor keys to move the cursor
in the program guide and menu
screens.
Use SELECT/OK to choose options,
PPV events, and to tune programs from
the program guide.
Use INFO to display current channel and
program information.
Press MENU once to display your cable
converter's screen menu.
Use PAGE ▲(or PAGE ▼) to
page up or down) through menu
screens and the program guide.
Reserved for use as "Tune-In" keys
(see page 29).
Slide the door open to reveal less-often
used keys such as VCR transport
buttons and cable converter features.
In the VCR and TV modes, use the
REW, PLAY, FF, REC, STOP,
and PAUSE keys to control your
VCR. To record a program, press REC twice.
Reserved for cable converter
features (see your cable converter
manual).
Press TV/VCR once to switch the VCR to
view TV channels or tape. This key will
also control the input select feature on most TVs.
6