Unlocking All Volume Control (Global Volume Unlock); Locking Volume Control To One Mode (Global Volume Lock) - Universal Electronics Helix Z-wave User Manual

Helix 5 Device.fm Page 18 Tuesday, June 5, 2007 5:24 PM
3. Press VOL- once. The last-selected device key
will blink four times.
4. Repeat steps 1 through 3 for each device you
want volume to be unlocked.
Now, after you select a device that has volume unlocked
(e.g., SAT), pressing VOL+, VOL-,or MUTE, will control
only that device's volume.

Unlocking All Volume Control (Global Volume Unlock)

NOTE:
Performing these instructions will set inde-
pendent volume control for all programmed
devices.
On the remote control, press and hold SETUP
1.
until the last-selected device key blinks twice.
Enter 9 9 3. The last-selected device key will
2.
blink twice.
3. Press VOL+ once. The last-selected device key
will blink four times.
Locking Volume Control To One Mode (Global
Volume Lock)
NOTE: The audio mode's volume controls are active
regardless of Volume Lock settings. However,
if you lock the volume controls to the AMP
mode, you will control the audio device's vol-
ume in all other modes (i.e., VCR, DVD, TV, or
CBL). This can be an advantage if, for exam-
ple, you always listen to home entertainment
devices through your receiver's speakers.
1. On the remote control, press and hold SETUP
until the last-selected device key blinks twice.
2. Enter 9 9 3. The last-selected device key will
blink twice.
3. Select a mode (e.g., TV or AMP) which you
want to use to control the volume. The
selected device key will blink twice.
www.urcsupport.com
18