Table of Contents
Advertisement
Millennium 4 Mnl M4090
7/23/99 9:34 AM
Page 5
Key Charts
The LED (red light) blinks to show that
the remote control is working and is
sending signals.
Press AUDIO, VCR, TV, or CBL once
to select a home entertainment
component to control.
Press POWER once to turn on or off
the selected home entertainment
component.
Use SETUP for all programming
sequences.
Use the keypad (0 ~ 9) to directly select
channels (e.g., 09 or 31).
Press MUTE once to turn sound off
or on.
Press ENTER once after entering channel
numbers on some TV models.
Use volume
(or volume
) to raise (or
+
-
lower) the sound volume.
Use CH + (or CH -) to select the next higher
(or lower) channel.
Press LAST once to recall the last channel
and to page back one screen in the
main menu.
Use FAV to cycle through your favorite
channels that are stored in your cable
converter.
Use GUIDE to display the program guide.
Press PPV/LOCK once to display the pay
per view menu or to lock out a specific
channel on your cable converter.
Use EXIT to exit out of your cable
converter's menu and guide.
continued on next page...
5
Advertisement
Table of Contents
