Table of Contents
Advertisement
Helix 5 Device.fm Page 14 Tuesday, June 5, 2007 5:24 PM
•
Learning capacity is approximately 16 to 25 keys,
depending on the code being learned.
•
Certain device functions are not learnable including
multi-frequency types, some high frequency ones,
and other unusual formats.
•
For optimum learning, avoid high levels of ambient
light such as natural sunlight or energy-efficient
fluorescent lights.
Please have your original remote controls
NOTE:
handy before programming learning.
Programming a Learned Key
NOTE:
If more than 15 seconds pass between key
presses, the remote exits programming.
Press and hold SETUP until the last-selected
1.
mode key blinks twice, then press 9 7 5.
NOTE:
If the LED displays one long flash instead,
either your batteries are low, or the Helix Z-
wave 5-Device Remote Control with Learning
has a memory fault.
2.
Press a mode key once (i.e., TV, DVD/VCR, SAT,
or AUX) to assign a mode for learning.
3.
Then press the key on your Helix Remote
Control that learns the new code.
4.
Place the Helix Z-wave 5-Device Remote
Control with Learning head-to-head (about 2"
apart) from your original remote control. Also
locate the key (on your original remote
control) that you want the Helix Z-wave 5-
Device Remote Control with Learning to
learn.
5.
On the original remote, press and hold the key
to be learned. The Helix Z-wave 5-Device
Remote Control with Learning's LED will
blink rapidly, then turn off. Continue holding
www.urcsupport.com
14
2"
Advertisement
Table of Contents
