About The Documentation; Documentation And Release Notes; Supported Platforms; Using The Examples In This Manual - Juniper EX9200 Features Manual

About the Documentation

Documentation and Release Notes

Supported Platforms

Using the Examples in This Manual

Copyright © 2017, Juniper Networks, Inc.
Documentation and Release Notes on page xv
Supported Platforms on page xv
Using the Examples in This Manual on page xv
Documentation Conventions on page xvii
Documentation Feedback on page xix
Requesting Technical Support on page xix
To obtain the most current version of all Juniper Networks
see the product documentation page on the Juniper Networks website at
http://www.juniper.net/techpubs/
If the information in the latest release notes differs from the information in the
documentation, follow the product Release Notes.
Juniper Networks Books publishes books by Juniper Networks engineers and subject
matter experts. These books go beyond the technical documentation to explore the
nuances of network architecture, deployment, and administration. The current list can
be viewed at
http://www.juniper.net/books
For the features described in this document, the following platforms are supported:
EX Series
If you want to use the examples in this manual, you can use the
merge relative command. These commands cause the software to merge the incoming
configuration into the current candidate configuration. The example does not become
active until you commit the candidate configuration.
If the example configuration contains the top level of the hierarchy (or multiple
hierarchies), the example is a full example. In this case, use the
®
.
.
technical documentation,
or the
load merge load
command.
load merge
xv