Advertise-Interval - Juniper EX9200 Features Manual

advertise-interval

Syntax
Hierarchy Level
Release Information
Description
Options
Required Privilege
Level
Related
Documentation
Copyright © 2017, Juniper Networks, Inc.
advertise-interval seconds;
[edit interfaces interface-name unit logical-unit-number family inet address address
vrrp-group group-id],
[edit logical-systems logical-system-name interfaces interface-name unit logical-unit-number
family inet address address
Statement introduced before Junos OS Release 7.4.
Statement introduced in Junos OS 11.3 for the QFX Series.
Statement introduced in Junos OS Release 14.1x53-D20 for the OCX Series.
Configure the interval between Virtual Router Redundancy Protocol (VRRP) IPv4
advertisement packets.
All routers in the VRRP group must use the same advertisement interval.
NOTE: When VRRPv3 is enabled, the
used to configure advertisement intervals. Instead, use the
statement to configure advertisement intervals.
—Interval between advertisement packets.
seconds
Range: 1 through 255 seconds
Default: 1 second
interface—To view this statement in the configuration.
interface-control—To add this statement to the configuration.
Configuring the Advertisement Interval for the VRRP Master Router on page 135
fast-interval on page 267
inet6-advertise-interval on page 270
version-3 on page 282
Chapter 24: Configuration Statements: VRRP
vrrp-group group-id]
advertise-interval
statement cannot be
fast-interval
261