Juniper EX9200 Features Manual page 339

Table 29: show system switchover Output Fields (continued)
Field Name Field Description
State of the kernel database:
Kernel database
Peer state Routing Engine peer state:
This field is displayed only when ksyncd is running in multichassis mode (LCC master).
Switchover Status Switchover Status:
Sample Output
show system switchover (Backup Routing Engine - Ready)
show system switchover (Backup Routing Engine - Not Ready)
show system switchover (MX Virtual Chasiss)
Copyright © 2017, Juniper Networks, Inc.
—Kernel database has synchronized. This message implies that the system is ready for GRES.
Ready
—Kernel database is synchronizing. Displayed when there are updates within the last
Synchronizing
5 seconds.
—The primary and standby Routing Engines are running incompatible kernel
Version incompatible
database versions.
—An error occurred when the state was replicated from the primary Routing Engine.
Replication error
Inspect Steady State for possible causes, or notify Juniper Networks customer support.
—Peer completed switchover transition.
Steady State
—Peer in switchover transition.
Peer Connected
Ready —Message for system being switchover ready.
—Message for system not being ready for switchover.
Not Ready
user@host> show system switchover
Graceful switchover: On
Configuration database: Ready
Kernel database: Ready
Peer state: Steady State
Switchover Status: Ready
user@host> show system switchover
Graceful switchover: On
Configuration database: Ready
Kernel database: Ready
Peer state: Steady StateSwitchover Status: Not Ready
{master:member1-re1}
user@host> show system switchover
member0:
--------------------------------------------------------------------------
Graceful switchover: On
Configuration database: Ready
Kernel database: Ready
Switchover Status: Ready
member1:
Chapter 26: Operational Commands
319