Verifying Nonstop Bridging Operation; Resetting Local Statistics - Juniper EX9200 Features Manual

High Availability Feature Guide for EX9200 Switches

Verifying Nonstop Bridging Operation

Related
Documentation

Resetting Local Statistics

Related
Documentation
32
NOTE: A newly inserted backup Routing Engine automatically synchronizes
its configuration with the master Routing Engine configuration.
When you configure nonstop bridging, you can bring the backup Routing
Engine online after the master Routing Engine is already running. There is no
requirement to start the two Routing Engines simultaneously.
When you enable nonstop bridging, you can issue Layer 2 Control Protocol-related
operational mode commands on the backup Routing Engine. However, the output of the
commands might not match the output of the same commands issued on the master
Routing Engine.
Nonstop Bridging Concepts on page 25
Nonstop Bridging System Requirements on page 29
nonstop-bridging on page 249
Configuring Nonstop Bridging on EX Series Switches (CLI Procedure)
After a graceful Routing Engine switchover, we recommend that you issue the
interface statistics (interface-name | all)
local statistics on the new master Routing Engine.
Configuring Nonstop Active Routing on page 53
Tracing Nonstop Active Routing Synchronization Events on page 55
command to reset the cumulative values for
Copyright © 2017, Juniper Networks, Inc.
clear