Inet6-Advertise-Interval - Juniper EX9200 Features Manual

High Availability Feature Guide for EX9200 Switches

inet6-advertise-interval

Syntax
Hierarchy Level
Release Information
Description
Options
Required Privilege
Level
Related
Documentation
270
inet6-advertise-interval milliseconds;
[edit interfaces interface-name unit logical-unit-number family inet6 address address
vrrp-inet6-group group-id],
[edit logical-systems logical-system-name interfaces interface-name unit logical-unit-number
family inet6 address address
Statement introduced in Junos OS Release 8.4R2.
Configure the interval between Virtual Router Redundancy Protocol (VRRP) IPv6
advertisement packets.
All routers in the VRRP group must use the same advertisement interval.
NOTE: When VRRPv3 is enabled, the
cannot be used to configure advertisement intervals. Instead, use the
fast-interval statement to configure advertisement intervals.
milliseconds —Interval, in milliseconds, between advertisement packets.
Range: 100 to 40,000 milliseconds (ms)
Default: 1 second
interface—To view this statement in the configuration.
interface-control—To add this statement to the configuration.
Configuring the Advertisement Interval for the VRRP Master Router on page 135
advertise-interval on page 261
fast-interval on page 267
version-3 on page 282
vrrp-inet6-group group-id]
inet6-advertise-interval
Copyright © 2017, Juniper Networks, Inc.
statement