Stale-Routes-Time - Juniper EX9200 Features Manual

High Availability Feature Guide for EX9200 Switches

stale-routes-time

Syntax
Hierarchy Level
Release Information
Description
Options
Required Privilege
Level
Related
Documentation
246
stale-routes-time seconds;
[edit logical-systems logical-routing-name protocols bgp graceful-restart],
[edit logical-systems logical-routing-name routing-instances routing-instance-name protocols
bgp graceful-restart],
[edit protocols bgp graceful-restart],
[edit routing-instances routing-instance-name protocols bgp graceful-restart]
Statement introduced in Junos OS Release 8.3.
Statement introduced in Junos OS Release 9.0 for EX Series switches.
Statement introduced in Junos OS Release 12.1 for the QFX Series.
Statement introduced in Junos OS Release 14.1x53-D20 for the OCX Series.
Specify the maximum time that stale routes are kept during a restart. The
statement allows you to set the length of time the routing device waits to receive
messages from restarting neighbors before declaring them down.
—Time the router device waits to receive messages from restarting neighbors
seconds
before declaring them down.
Range: 1 through 600 seconds
Default: 300 seconds
routing—To view this statement in the configuration.
routing-control—To add this statement to the configuration.
Configuring Graceful Restart Options for BGP on page 77
Configuring Graceful Restart for QFabric Systems
restart-time (BGP Graceful Restart) on page 245
stale-routes-time
Copyright © 2017, Juniper Networks, Inc.