Motherboard Installation; Tools Needed; Location Of Mounting Holes - Supermicro X11SSH-GF-1585 User Manual

2.2 Motherboard Installation

All motherboards have standard mounting holes to fit different types of chassis. Make sure
that the locations of all the mounting holes for both the motherboard and the chassis match.
Although a chassis may have both plastic and metal mounting fasteners, metal ones are
highly recommended because they ground the motherboard to the chassis. Make sure that
the metal standoffs click in or are screwed in tightly.
Philips
Screwdriver (1)

Tools Needed

J23
J24
JSTBY1
JPME2
USB2/3
I-SATA4
JSD2
JSD1

Location of Mounting Holes

Note: 1) To avoid damaging the motherboard and its components, please do not use
a force greater than 8 lb/inch on each mounting screw during motherboard installation.
2) Some components are very close to the mounting holes. Please take precautionary
measures to avoid damaging these components when installing the motherboard to
the chassis.
Philips Screws (8)
VGA
MH10
MH9
LEDM1
MH8
JPB1 JPG1
JVRM1 JVRM2
M.2 CONNECTOR
BAT1 J3
Intel®
C236
JBT1
I-SATA6
FAN3
FANA
I-SGPIO1
I-SGPIO2
USB8/9
(3.0)
USB0/1
LAN2 LAN1
IPMI_LAN
JPL1
X11SSH-GF-1585L
REV:1.01
DESIGNED IN USA
BAR CODE
BIOS LICENSE
IPMI CODE
MAC CODE
SAN MAC
CPU
FAN1 (CPU FAN)
FAN2
23
Chapter 2: Installation
Standoffs (8)
Only if Needed
COM1
SP1
JF1
JF1
LED2
JPWR2