About This Manual
This manual is written for system integrators, IT technicians and knowledgeable end users.
It provides information for the installation and use of the X11SSH-GF/-GTF (-1585/-1585L)
motherboard.
About This Motherboard
The X11SSH-GF/-GTF (-1585/-1585L) motherboard supports the Intel® Xeon®
E3-1500 v5 (E3-1585 v5/65W; E3-1585L v5/45W) series for advanced graphic
performance and high-capacity media processing. Featuring the Intel® C236 chipset, the
X11SSH-GF/-GTF (-1585/-1585L) motherboard provides up to 64GB of DDR4 at 2400MHz
with ECC support. Enhanced with Intel's Trusted Execution Technology, the motherboard
additionally offers technologies such as Virtualization for Directed I/O, vPro, Smart Response,
and Rapid Storage. The X11SSH-GF/-GTF (-1585/-1585L) includes PCI Express 3.0 slots
with NVMe support, SATA 3.0 ports, and a combination of USB 3.0 and USB 2.0 ports. The
X11SSH-GF/-GTF (-1585/-1585L) also comes with a dedicated LAN port, which is supported
by the ASpeed AT2400 Baseboard Management Controller.
Please note that this motherboard is intended to be installed and serviced by professional
technicians only. For processor/memory updates, please refer to our website at http://www.
supermicro.com/products/.
Conventions Used in the Manual
Special attention should be given to the following symbols for proper installation and to prevent
damage done to the components or injury to yourself:
Warning! Indicates important information given to prevent equipment/property damage
or personal injury.
Warning! Indicates high voltage may be encountered when performing a procedure.
Important: Important information given to ensure proper system installation or to
relay safety precautions.
Note: Additional Information given to differentiate various models or provides infor-
mation for correct system setup.
Preface
3
Preface