Table of Contents
Advertisement
X11SSH-GF/-GTF (-1585/-1585L) User's Manual
1.2 Processor and Chipset Overview
Built upon the functionality and capability of the Intel® E3-1500 v5 (E3-1585 v5/65W;
E3-1585L v5/45W) series processors (Socket BGA 1440) and the Intel® C236 PCH, the
X11SSH-GF/-GTF (-1585/-1585L) motherboard offers maximum I/O expandability, energy
efficiency, and data reliability in a 14-nm process architecture, and is optimized for embedded
storage solutions, networking applications, and cloud-computing platforms.
The Intel® E3-1500 v5 and PCH C236 platform supports the following features:
•
ACPI Power Management Logic Support
•
Intel® Turbo Boost Technology 2.0 Power Monitoring/Power Control, Turbo Time Parameter
(TAU), and Platform Power Control
•
Configurable TDP (cTDP) and Lower-Power Mode
•
Adaptive Thermal Management/Monitoring
•
PCI-E 3.0, SATA 3.0 with transfer rates of up to 6 Gb/s
•
System Management Bus (SMBus) Specification Version 2.0
•
Integrated Sensor Hub (ISH)
•
Intel® Trusted Execution Technology (Intel® TXT)
•
Intel® Rapid Storage Technology
•
Intel® Virtualization Technology for Directed I/O (Intel® VT-d)
1.3 Special Features
This section describes the health monitoring features of the X11SSH-GF/-GTF motherboard.
The motherboard has an onboard System Hardware Monitor chip that supports system health
monitoring.
Recovery from AC Power Loss
The Basic I/O System (BIOS) provides a setting that determines how the system will respond
when AC power is lost and then restored to the system. You can choose for the system to
remain powered off (in which case you must press the power switch to turn it back on), or
for it to automatically return to the power-on state. See the Advanced BIOS Setup section
for this setting. The default setting is Last State.
18
Advertisement
Table of Contents
