Table of Contents
Advertisement
X11SSH-GF/-GTF (-1585/-1585L) User's Manual
immediately and allow the drives that are attached to these host adaptors to function as
bootable disks. If this item is set to Postponed, the ROM BIOS of the host adaptors will not
capture Interrupt 19 immediately and allow the drives attached to these adaptors to function
as bootable devices at bootup. The options are Immediate and Postponed.
Re-try Boot
If this item is enabled, the BIOS will automatically reboot the system from a specified boot
device after its initial boot failure. The options are Disabled, Legacy Boot, and EFI Boot.
Install Windows 7 USB Support
Select Enabled to use the USB keyboard and mouse for Windows 7. After the installation
of Windows 7 and XHCI driver, please disable this feature inside the BIOS. The options are
Disabled and Enabled.
Power Configuration
Watch Dog Function
If enabled, the Watch Dog timer will allow the system to reset or generate NMI based on
jumper settings when the system is inactive more than 5 minutes. The options are Disabled
and Enabled .
Power Button Function
This feature controls how the system shuts down when the power button is pressed. Select
4_Seconds_Override for the user to power off the system after pressing and holding the power
button for 4 seconds or longer. Select Instant Off to instantly power off the system as soon
as the user presses the power button. The options are Instant Off and 4 Seconds Override .
Restore on AC Power Loss
Use this feature to set the power state after a power outage. Select Stay-Off for the system
power to remain off after a power loss. Select Power-On for the system power to be turned
on after a power loss. Select Last State to allow the system to resume its last power state
before a power loss. The options are Stay-Off, Power-On, and Last State.
CPU Configuration
The following CPU information will be displayed:
CPU Signature
•
Intel® Xeon® CPU E3-1585L v5 @3.00GHz
•
CPU Signature
•
Microcode Patch
66
Advertisement
Table of Contents
