Ipmi; System Event Log - Supermicro X11SSH-GF-1585 User Manual

X11SSH-GF/-GTF (-1585/-1585L) User's Manual

4.5 IPMI

This submenu allows the user to configure Intelligent Platform Management Interface (IPMI)
settings.
The following IPMI information will be displayed:
•
BMC Firmware Revision
•
IPMI STATUS

System Event Log


Enabling/Disabling Options
SEL Components
Select Enabled to enable all system event logging support at bootup. The options are Disabled
and Enabled.
Erasing Settings
Erase SEL
Select Yes, On next reset to erase all system event logs upon next system reboot. Select Yes,
On every reset to erase all system event logs upon each system reboot. Select No to keep
all system event logs after each system reboot. The options are No, (Yes, On next reset),
and (Yes, On every reset).
When SEL is Full
This feature allows the user to determine what the AMI BIOS should do when the system
event log is full. Select Erase Immediately to erase all events in the log when the system
event log is full. The options are Do Nothing and Erase Immediately.
Note: After making changes on a setting, be sure to reboot the system for the changes
to take effect.
90