X11SSH-GF/-GTF (-1585/-1585L) User's Manual
Serial Port 2 Change Settings
This feature specifies the base I/O port address and the Interrupt Request address of a
serial port specified by the user. Select Auto to allow the BIOS to automatically assign the
base I/O and IRQ address.
The options for Serial Port 2 are Auto, (IO=2F8h; IRQ=3), (IO=3F8h; IRQ=3, 4, 5, 6, 7, 9,
10, 11, 12), (IO=2F8h; IRQ=3, 4, 5, 6, 7, 9, 10, 11, 12), (IO=3E8h; IRQ=3, 4, 5, 6, 7, 9, 10,
11, 12), and (IO=2E8h; IRQ=3, 4, 5, 6, 7, 9, 10, 11, 12).
Serial Port 2 Attribute
Select SOL to use COM Port 2 as a Serial_Over_LAN (SOL) port for console redirection.
The options are SOL and COM.
Intel Server Platform Services
Intel Server Platform Services Configuration
The following items will display as detected by the BIOS:
•
ME BIOS Interface Version
•
SPS Version
•
ME FW (Firmware) Status Value
•
ME FW (Firmware) State
•
ME FW (Firmware) Operation State
•
ME FW (Firmware) Error Code
•
ME NM FW (Firmware) Status Value
•
BIOS Booting Mode
•
Cores Disabled
•
ME FW (Firmware) SKU Information
•
End-of POST Status
82