Usb Configuration - Supermicro X11SSH-GF-1585 User Manual

X11SSH-GF/-GTF (-1585/-1585L) User's Manual
Onboard LAN1 Option ROM
Use this option to select the type of device installed in LAN Port1 used for system boot. The
default setting for this item is Enabled.
Onboard LAN2 Option ROM
Use this option to select the type of device installed in a LAN port specified by user for system
boot. The default setting for this item is Disabled.
Onboard Video Option ROM
Use this item to select the Onboard Video Option ROM type. The options are Disabled,
Legacy, and EFI.
Network Stack
Select Enabled to enable PXE (Preboot Execution Environment) or UEFI (Unified Extensible
Firmware Interface) for network stack support. The options are Disabled and Enabled.
IPv4 PXE Support
Select Enabled to enable IPv4 PXE boot support. The options are Disabled and Enabled.
IPv6 PXE Support
Select Enabled to enable IPv6 PXE boot support. The options are Disabled and Enabled.
PXE boot wait time
Use this option to specify the wait time to press the ESC key to abort the PXE boot. Press
"+" or "-" on your keyboard to change the value. The default setting is 0.
Media detect count
Use this option to specify the number of times media will be checked. Press "+" or "-" on your
keyboard to change the value. The default setting is 1.
USB Configuration
The following USB items will display.
•
USB Module Version
•
USB Controllers
•
USB Devices
Legacy USB Support (Available when USB Functions is not Disabled)
Select Enabled to support legacy USB devices. Select Auto to disable legacy support if USB
devices are not present. Select Disabled to have USB devices available for EFI (Extensive
Firmware Interface) applications only. The settings are Enabled, Disabled, and Auto.
80