Network Interfaces (Onboard); Pcie Expansion; Tpm Module; Lcd Module - Advantech FWA-5020 User Manual

Most of the SMBus devices are only accessed by BIOS at system start up to
determine and set system configuration. Tampering with these devices may lead to
system instability and malfunction.
Information on the hardware monitor and how to access it is provided in section
2.4.13.
Information reg. the FRU EEPROM can be found in section 2.4.15.

2.4.7 Network interfaces (onboard)

+
The FWA-5020 supports a total of 6 network ports by copper and 2x 10G SFP port
fiber on board.
There are 2 i210 GbE LAN device for management(locations F5), and 1 i350 for
"traffic" ports(locations F6), the i210 is a single LAN chip and i350 GbE LAN device is
a four port LAN chip, compact, low power components that offer a fully integrated
Gigabit Ethernet Media Access Control (MAC) and Physical Layer (PHY) port.
The i210 LAN chip and i350 LAN chip are connected from integrated PCH PCIe port.
The LAN chip can support PCIe Gen1 and 10/100/1000 Mb/s.
+
The Fortivlle X710 supports 2x 10G SFP for front I/O expansion. (location: F7)

2.4.8 PCIe Expansion

-2 std PCIe x8 for NMC expansion
-1 High speed x16 connector for either riser card or front I/O supports
Note: Riser card could supports proprietary crypto x16 PCIe card (PCIe-3021)

2.4.9 TPM Module

-On board
-Infineon Infineon SLB 9635TT 1.2 TPM module is used in this design.
-The Firmware Version 3.17
-TCG-compliant Trusted Platform Module
-LPC interface
-Security architecture based on Infineon security controller family
-The I/O space 4Eh/4Fh

2.4.10 LCD Module

Features
-21 columns × 4 lines text display
-128 × 32 dots graphic display
-Text wrap, scroll and inverse capability
-Built in characters plus 16 user defined characters
-Communicate over RS232 interface
_20161111
FWA-5020 User Manual v01 Copyright 2015 Advantech Co. Ltd. All rights reserved. Page 39