Post & Boot Menu - Advantech FWA-5020 User Manual

"Administrator Password" allows users to configure the system so that a password
after being installed is required each time the system boots, and/or an attempt is
made to enter the Setup program.
Note:

If set the "Password Check" is [Setup], then this only limits access to Setup and is only
asked for when entering Setup.

If set the "Password Check" is [Always], then this is a power on password and must be
entered to boot or enter Setup. In Setup the User will have Administrator rights.

The password length must be in the following range:

Minimum length: 3

Maximum length: 20
3.2.6 POST & Boot Menu
Users can configure the system boot priority settings via the boot page. The default
setting of boot priority of boot option #1 is "UEFI: Built-in EFI Shell"; Users can define
the boot priorities based on the application.
_20161111
FWA-5020 User Manual v01 Copyright 2015 Advantech Co. Ltd. All rights reserved. Page 73