Removing The Top Cover; Figure 43: Top Cover Screw (Top Cover/ Fwa-5020U-D0A1R); Figure 44: Slide Top Cover Back - Advantech FWA-5020 User Manual

3.3.1 Removing the top cover

You need:
-
a PH2/PH3 screw driver
The top cover is secured by a total of 7 screws, 1 on the left, and 6 on the top cover.

Figure 43: Top cover screw (Top cover/ FWA-5020U-D0A1R)

To remove the top cover, remove these screws using a PH1 screw driver. Be sure to
keep the screws in a safe place for top cover re-installation.
After that, slide the top cover backwards until the front flange of the top cover
disengages with the unit's face plate:

Figure 44: Slide Top Cover back

_20161111
FWA-5020 User Manual v01 Copyright 2015 Advantech Co. Ltd. All rights reserved. Page 77