Led Details; Figure 11: Front Leds - Advantech FWA-5020 User Manual

2.4.1.1 LED details

Three LEDs are provided at the front for signalling important system status at
location F2 and F3.

Figure 11: Front LEDs

System Power state
LED color: Green
FRU LED ID: 0x08
LED will be 'on' when system powered on
Locate LED
LED color: Blue
FRU LED ID: 0x09
LED will only be 'on' when following condition is met:
1. Controlled by IPMI command "Chassis Identify" (IPMI Tool 28.5)
Alert LED
LED color: Amber
FRU LED ID: 0x0a
LED will only be 'on' when following faults being detected in following 2 modes:
1. Local control mode: System Critical Events occurs. Configurable options are
provided in PEF OEM action entries. See section 5.1.1 for more information
2. Override mode: User can control this LED manually by PICMG command 'Set
FRU LED State'
_20161111
FWA-5020 User Manual v01 Copyright 2015 Advantech Co. Ltd. All rights reserved. Page 32