Scanner Automatic Feeder Cover Open - Lexmark CX310 Series User Manual

Troubleshooting
Replace unsupported black and color imaging kit [32.xy]
Remove the indicated imaging kit, and then install a supported one to clear the message and continue
printing. For more information, see the instruction sheet that came with the supply.
The following error codes indicate that a non‑genuine Lexmark imaging kit is installed:
32.00
32.01
32.02
32.07
32.08
32.09
32.36
32.37
32.51
32.52
32.55
32.56
32.57
32.58
32.59
For more information, see
Note: If you do not have a replacement imaging kit, then see the "Ordering supplies" section or go to
www.lexmark.com.
Replace waste toner bottle [82.xy]
Replace the waste toner bottle to clear the message.

Scanner automatic feeder cover open

Close the ADF cover.
Scanner disabled by admin [840.01]
Print without the scanner, or contact your system support person.
Scanner disabled. Contact system administrator if problem
persists. [840.02]
From the printer control panel, try one or more of the following:
•
Select Continue with scanner disabled to return to the home screen, and then contact your system
support person.
•
Select Reboot and automatically enable scanner to cancel the job.
Note: This attempts to enable the scanner.
"Using genuine Lexmark parts and supplies" on page 132.
178