Lexmark CX310 Series User Manual page 222

Troubleshooting
Action
Step 2
Make sure the printer IP address is correct.
a
View the printer IP address:
•
From the TCP/IP section in the Network/Ports menu
•
By printing a network setup page or menu settings page,
and then finding the TCP/IP section
Note: An IP address appears as four sets of numbers
separated by periods, such as 123.123.123.123.
b
Open a Web browser, and then type the IP address.
Note: Depending on the network settings, you may need to
type "https://" instead of "http://" before the printer IP
address to access the Embedded Web Server.
c
Press Enter.
Does the Embedded Web Server open?
Step 3
Check if the network is working.
a
Print a network setup page.
b
Check the first section of the network setup page and confirm
that the status is Connected.
Note: If the status is Not Connected, then the connection
may be intermittent, or the network cable may be defective.
Contact your system support person for a solution, and then
print another network setup page.
c
Open a Web browser, and then type the printer IP address.
d
Press Enter.
Does the Embedded Web Server open?
Step 4
Check if the cable connections to the printer and print server are
secure.
a
Connect the cables properly. For more information, see the
setup documentation that came with the printer.
b
Open a Web browser, and then type the printer IP address.
c
Press Enter.
Does the Embedded Web Server open?
Step 5
Temporarily disable the Web proxy servers.
Proxy servers may block or restrict you from accessing certain
Web sites including the Embedded Web Server.
Does the Embedded Web Server open?
Yes No
The problem is Go to step 3.
solved.
The problem is Go to step 4.
solved.
The problem is Go to step 5.
solved.
The problem is Contact your system
solved. support person.
222