Lexmark CX310 Series User Manual page 94

Understanding the printer menus
Use
Manually Set Date and Time
[input date/time]
Time Zone
[list of time zones]
Automatically observe DST
On
Off
Enable NTP
On
Off
To
Enter the date and time.
Notes:
•
Manually setting the date and time sets Enable NTP to No.
•
The wizard lets you set the date and time in YYYY‑MM‑DD‑HH:MM
format.
Select the time zone.
Note: GMT is the factory default settings.
Set the printer to use the applicable daylight saving time (DST) start and end
times associated with the printer Time Zone setting.
Note: On is the factory default setting.
Enable Network Time Protocol, which synchronizes the clocks of devices on a
network.
Notes:
•
On is the factory default setting.
•
This setting is turned off if you manually set the date and time.
94