Restore Held Jobs; Scan Document Too Long; Scanner Automatic Feeder Cover Open - Lexmark MX810 Series User Manual

Troubleshooting

Restore held jobs?

Try one or more of the following:
•
From the printer control panel, touch Restore to restore all held jobs stored in the printer hard disk.
•
From the printer control panel, touch Do not restore if you do not want to restore any of the print jobs.

Scan document too long

The scan job exceeds the maximum number of pages. Touch Cancel job to clear the message and cancel the scan job.

Scanner automatic feeder cover open

Close the ADF cover.
Scanner disabled by admin [840.01]
Print without the scanner, or contact your system support person.
Scanner disabled. Contact system administrator if problem persists. [840.02]
Try one or more of the following:
•
Touch Continue with scanner disabled to return to the home screen, and then contact your system support person.
• Touch Reboot and automatically enable scanner to cancel the job.
Note: This attempts to enable the scanner.
Scanner jam, remove all originals from the scanner [2yy.xx]
Remove the jammed paper from the scanner.
Scanner jam, remove jammed originals from the scanner [2yy.xx]
Remove the jammed paper from the scanner.
Scanner maintenance required soon, use ADF Kit [80]
Contact customer support, and then report the message. The printer is scheduled for maintenance.
Serial option [x] error [54]
Try one or more of the following:
• From the printer control panel, touch Continue to continue printing.
•
Check that the serial cable is properly connected and is the correct one for the serial port.
315