Placing Information On Copies - Lexmark CX310 Series User Manual

Copying
3
From the printer control panel, navigate to:
> Copy >
4
Select Between Copies, Between Jobs, Between Pages, or Off.
5
Select the number of copies or enter a number on the keypad, and then press
Note: If you want to copy another document, then place it on the scanner glass, press the left or right
arrow button to scroll to Scan the Next Page, and then press
Press the left or right arrow button to scroll to Finish the Job, and then press
6
Copying multiple pages onto a single sheet
To save paper, you can copy either two or four consecutive pages of a multiple‑page document onto a single
sheet of paper.
Notes:
•
Make sure the paper size is set to letter, legal, A4, or JIS B5.
•
The copy size must be set to 100%.
1
Load an original document faceup, short edge first into the ADF tray or facedown on the scanner glass.
Notes:
•
Do not load postcards, photos, small items, transparencies, photo paper, or thin media (such as
magazine clippings) into the ADF tray. Place these items on the scanner glass.
•
The ADF indicator light comes on when the paper is loaded properly.
2
If you are loading a document into the ADF tray, then adjust the paper guides.
3
From the printer control panel, navigate to:
> Copy >
4
Select Off, 2‑up Portrait, 2‑up Landscape, 4‑up Portrait, or 4‑up Landscape.
5
Select the number of copies or enter a number on the keypad, and then press
Note: If you want to copy another document, then place it on the scanner glass, press the left or right
arrow button to scroll to Scan the Next Page, and then press
Press the left or right arrow button to scroll to Finish the Job, and then press
6

Placing information on copies

Placing an overlay message on each page
1
Load an original document faceup, short edge first into the ADF tray or facedown on the scanner glass.
> Separator Sheets
> Paper Saver > select the setting that you want
.
.
.
.
.
.
62